V1000 Skid Steer Loader – Track Power for Tight Spaces
Pilot-joystick control, triangle rubber tracks, vertical lift, and safety lock. Built for steady work and easy service.
V1000 Skid Steer Loader – Track Power for Tight Spaces
What is the V1000 skid steer loader?
The V1000 skid steer loader is a compact tracked loader for narrow jobsites. It uses pilot joysticks for light, precise control and a vertical-lift boom for more lift height in the same footprint. A vehicle-exit safety lock and operator-presence pedal help prevent unintended movement. The undercarriage uses triangle rubber tracks for grip on dirt, grass, and gravel while keeping straight tracking on long runs.
Where V1000 works best?
- Urban maintenance, landscaping, and small construction sites
- Barns, livestock sheds, feedlots and farm lanes
- Warehouse yards, material transfer, small demolition
- Dock or airport support where compact size and agility are critical
| Model | V1000 |
| Operating Weight | 1892 kg |
| Bucket Capacity | 0.19 m³ |
| Climbing Ability | 25° |
| Maximum Breakout Force | 4.5 KN |
| Rated Load | 500 kg |
| Maximum Load | 650 kg |
| Travel Speed | 0–6 km/h |
| Vehicle Width | 960 mm |
| Rated Pressure | 17–20 Mpa |
| Bucket Width | 1240 mm |
| Max Loading Height | 2102 mm |
| Max Dumping Height | 1522 mm |
| Max Operating Height | 2794 mm |
| Height to Bucket Pin | 2140 mm |
| Max Height Bucket Dump Angle | 63° |
| Min Height | 1548 mm |
| Departure Angle | 29° |
| Ground Clearance | 200 mm |
| Dumping Distance | 498 mm |
| Track Contact Length | 1080 mm |
| Overall Dimensions | 2691×1240×1548 mm |
| Length Including Bucket | 2691 mm |
| Length Excluding Bucket | 1981 mm |
| Track Contact Length | 230×72×45 |
| Brand | Yanmar / Kubota |
| Model | 3TNV80 / D1105 |
| Rated Power | 15.2 (17.8) / 17.1 kW |
| Cylinder | 3 |
| Intake Method | Natural Inhalation |
| Emission Standard | EPA / Euro V |
| Fuel Tank Capacity | 40 L |
Why V1000 stands out?
1. Triple-pump, triple-valve hydraulics
Drive, lift and auxiliary lines are independent. You can travel, raise and run an attachment at the same time with smooth response.
2. Pilot joysticks
Short throw, very low effort. New operators learn fast; pros get fine metering around walls, trucks and people.
3. Stainless quick couplers
Swap tools in seconds. Sealed, corrosion-resistant couplers reduce leaks and downtime.
4. Dual-zone cooling
Engine radiator + hydraulic oil cooler work in two separate circuits. Oil and water temps stay stable in hot weather and long shifts.
5. Tool-free service
Lift-off side cooler screens and a one-pull automatic hood give two-minute daily checks. Filters and radiators are right there.
6. Lift-arm service lock
Steel support bar pins to the cylinders for rigid lockout during maintenance.
7. Triangle rubber tracks
High-mount drive sprocket + triangular layout improve climbing, obstacle clearance and straight-line stability, with less derail and edge wear.
8. Operator-presence pedal (with cushion)
The machine only activates when you stand in place. The pedal pad cuts vibration to your feet.
9. Self-leveling lift
Internal balance/holding valve keeps forks or buckets level through the lift arc—less spill, fewer corrections.
10. Adjustable counterweights
Side weights (15 kg blocks) can be added or removed to tune balance for forks, buckets or brush cutters.
11. Clean, protected hose routing
Nylon braided sleeves and spiral guards keep lines tidy and safe during boom cycles.
12. Lighting & safety
Front work light plus rear warning lamps improve visibility at night and on busy sites.
Detailed features
- Vertical-lift boom for more lift height without a longer frame.
- Vehicle-exit safety lock + e-stop for quick shutdown.
- Service-friendly layout: numbered connectors, grouped filters, lift-off screens, front hood lift by side handle.
- Track contact length ~1080 mm with 230×72×45 track model for good flotation and comfort.
- Dump distance ~498 mm, dump angle 63° for quick truck loading.
- Departure angle ~29°, ground clearance ~200 mm to pass curbs and ruts.
Real User Stories
Municipal crew – alley cleanups, Europe
The team needed a loader that fits <1 m alleys, carries gravel and runs a sweeper. The V1000 skid steer loader with pilot joysticks let a new operator load, travel and sweep at once. Dual-zone cooling kept temps stable during summer afternoon shifts.
Dairy farm – feed lanes, New Zealand
On wet concrete, wheeled loaders slipped. The V1000’s triangle tracks kept traction and straight travel. Self-leveling forks reduced spillage when moving feed bins. With stainless quick couplers, switching to the brush cutter took under a minute.
Get your V1000 skid steer loader today!!
Get your V1000 skid steer loader today. Ask for pricing, shipping, and attachments. We also support OEM color/logo and distributor programs.
Attachments for the V1000 skid steer loader
- General bucket, 4-in-1 bucket, pallet forks
- Land-clearing drum (reversible 4-edge cutters + chain curtain)
- Auger, breaker, grapple, sweeper, snow tools
- More tools on request; quick-coupler ports are standard.
Common questions
Q: Is the V1000 compatible with my attachments?
A: Yes. It uses standard auxiliary hydraulics with stainless quick couplers. Tell us your flow/pressure; we’ll match your tools.
Q: What engines are available?
A: Yanmar or Kubota 3-cylinder diesel, EPA/Euro-5 compliant. Rated power is about 15–17.8 kW depending on model.
Q: How do I service the coolers?
A: Lift the side screens and blow out fins. Pull the side handle and the front hood opens automatically for fast checks.
Q: Shipping & support?
A: We supply crate-packed machines with manuals and parts lists. Global after-sales and spares are available.