TC06-10 Backhoe Loader
Compact backhoe loader for trenching, loading, and daily jobsite support.
TC06-10 Backhoe Loader
Backhoe Loader Overview
The TC06-10 Backhoe Loader combines a front loader and a rear backhoe on one machine. The front bucket handles loading and short moves. The rear digging unit handles trench work and small excavation. Backhoe loaders are common on utility sites because they can pick, load, dig, and backfill with one platform.
The TC06-10 Backhoe Loader fits work where space is limited and tasks change during the day. The machine supports steady digging with stabilizers. Many operators use stabilizers to improve stability, but they keep the lift moderate to avoid losing balance.
Typical Applications of Backhoe Loader
- Trench digging for water lines, cable, and drainage
- Loading soil, sand, and aggregate into trucks
- Backfilling and light compaction support around trenches
- Small site prep for housing and light commercial work
- Farm and yard material handling, cleanup, and grading
- Quarry support tasks such as loading loose material and moving stockpile edges
Why Choose TC06-10 Backhoe Loader?
- Two tools on one machine. The loader and backhoe reduce machine swaps, so the crew stays on task.
- Compact and practical handling. The machine supports tight turning and controlled moves for small sites.
- Stable digging support. The stabilizers help keep the machine steady during rear digging work.
- Operator-focused controls. The layout supports frequent direction changes and repeat cycles.
- Lower logistics load. One unit can cover daily trench, load, and backfill steps on many jobs.
TC06-10 Backhoe Loader Specifications
Key Specs
| Operating Weight | 2200 kg |
| Overall Dimensions (L×W×H) | 5000 × 1150 × 2800 mm |
| Wheelbase | 1618 mm |
| Wheel Tread | 840 mm |
| Minimum Ground Clearance | 175 mm |
| Fuel Tank Capacity | 20 L |
| Hydraulic Oil Tank Capacity | 20 L |
Performance
| System Pressure | 16 MPa |
| Maximum Travel Speed | 18 km/h |
| Gradeability | 18° |
| Minimum Turning Radius | 2600 mm |
| Steering Type | Articulated full hydraulic steering |
| Steering Angle | 33° |
| Drive Type | Four-wheel drive (4WD) |
| Transmission Type | Hydraulic transmission |
| Braking Distance | 330 mm |
Working Parameters
| Backhoe Parameters | |
| Max. Digging Depth | 2000 mm |
| Digging Dumping Height | 2600 mm |
| Max. Digging Radius | 2500 mm |
| Backhoe Bucket Width | 400 mm |
| Backhoe Bucket Capacity | 0.08 m³ |
| Max. Digging Height | 3300 mm |
| Max. Digging Force | 18 kN |
| Swing Angle | 120° |
| Loader Parameters | |
| Max. Dumping Height | 2000 mm |
| Max. Dumping Reach | 1000 mm |
| Loader Bucket Width | 1150 mm |
| Loader Bucket Capacity | 0.2 m³ |
| Max. Lifting Height | 3000 mm |
Powertrain & Chassis
| Engine | |
| Model | D1105-EF02 |
| Type | Direct injection, four-stroke |
| Rated Power | 18.2 kW |
| Rated Speed | 3000 r/min |
| Axle & Tires | |
| Axle Model | 25 axle |
| Tire Specification | 26*12-12 |
| Front Tire Pressure | 250 kPa |
| Rear Tire Pressure | 250 kPa |
| Service Brake | Disc brake |
| Parking Brake | Manual |
TC06-10 Backhoe Loader Detail Highlights
Front loader bucket detail
- The front bucket supports fast scooping and clean dumping.
- The bucket linkage supports controlled lift and rollback during loading work.
- The bucket edge supports repeated contact with soil and aggregate.
Operator station and controls
- The operator station keeps the main controls within easy reach.
- The layout supports quick switching between loader work and backhoe work.
- The open view supports safer positioning near trench lines and stockpiles.
Rear wheel and chassis detail
- The rear chassis supports stable travel on uneven ground.
- The wheel and frame structure supports daily jobsite movement and repositioning.
- The build supports frequent start-stop work during trench cycles.
Backhoe boom and bucket detail
- The backhoe boom supports trench digging and footing work.
- The bucket motion supports clean trench walls and steady cycle timing.
- The hose routing supports protected movement during full swing and curl.
- Direct factory supply. Torchuck supports model selection, options, and production scheduling.
- ODM/OEM support. Torchuck supports color, decals, and configuration matching for your market.
- Parts and service support. Torchuck supports spare parts lists, wear parts supply, and basic service guidance.
- Packing and shipping support. Torchuck supports export packing plans based on your route and container type.
- Clear communication. Torchuck supports photos, videos, and inspection records during production.
Real Jobsite Scenes
Backhoe Loader working in quarry
- The machine supports quick loading of loose material for short internal hauling.
- The machine supports cleanup work around stockpiles and access lanes.
- The machine supports steady movement on uneven quarry ground.
Backhoe Loader working on site
- The machine supports trench digging and staged backfill in one work flow.
- The loader supports material placement near the trench line.
- The backhoe supports clean trench work for utilities and drainage.
See the Factory. Tell Us Your Job. Get a Quote Today.
Send your country, application, and target quantity. Send your preferred engine and emission level if you have a requirement. Send your lead time target and port name. We will reply with options, pricing, and a shipping plan.
