TC06-10 Ekskavator-Loader
Compact backhoe loader for trenching, loading, and daily jobsite support.
TC06-10 Ekskavator-Loader
Backhoe Loader Overview
The TC06-10 Backhoe Loader combines a front loader and a rear backhoe on one machine. The front bucket handles loading and short moves. The rear digging unit handles trench work and small excavation. Backhoe loaders are common on utility sites because they can pick, load, dig, and backfill with one platform.
The TC06-10 Backhoe Loader fits work where space is limited and tasks change during the day. The machine supports steady digging with stabilizers. Many operators use stabilizers to improve stability, but they keep the lift moderate to avoid losing balance.
Aplikasi Umum Backhoe Loader
- Trench digging for water lines, cable, and drainage
- Loading soil, sand, and aggregate into trucks
- Backfilling and light compaction support around trenches
- Small site prep for housing and light commercial work
- Farm and yard material handling, cleanup, and grading
- Quarry support tasks such as loading loose material and moving stockpile edges
Why Choose TC06-10 Backhoe Loader?
- Two tools on one machine. The loader and backhoe reduce machine swaps, so the crew stays on task.
- Compact and practical handling. The machine supports tight turning and controlled moves for small sites.
- Stable digging support. The stabilizers help keep the machine steady during rear digging work.
- Operator-focused controls. The layout supports frequent direction changes and repeat cycles.
- Lower logistics load. One unit can cover daily trench, load, and backfill steps on many jobs.
TC06-10 Backhoe Loader Specifications
Spesifikasi Utama
| Berat Operasional | 2200 kg |
| Dimensi Keseluruhan (P × L × T) | 5000 × 1150 × 2800 mm |
| Jarak sumbu roda | 1618 mm |
| Pola Tapak Ban | 840 mm |
| Jarak Bebas ke Tanah Minimum | 175 mm |
| Kapasitas Tangki Bahan Bakar | 20 L |
| Kapasitas Tangki Oli Hidraulik | 20 L |
Kinerja
| Tekanan Sistem | 16 MPa |
| Kecepatan Maksimum Saat Berjalan | 18 km/h |
| Kemampuan menanjak | 18° |
| Radius Putar Minimum | 2.600 mm |
| Jenis Kemudi | Sistem kemudi hidraulik penuh yang dapat digerakkan |
| Sudut Kemudi | 33° |
| Jenis Drive | Penggerak empat roda (4WD) |
| Jenis Transmisi | Hydraulic transmission |
| Jarak Pengereman | 330 mm |
Parameter Kerja
| Backhoe Parameters | |
| Max. Kedalaman Penggalian | 2000 mm |
| Kedalaman Penggalian dan Ketinggian Pembuangan | 2.600 mm |
| Max. Menggali Radius | 2500 mm |
| Lebar Bucket Backhoe | 400 mm |
| Kapasitas Bucket Backhoe | 0,08 m³ |
| Max. Tinggi Penggalian | 3.300 mm |
| Max. Kekuatan Penggalian | 18 kN |
| Swing Angle | 120° |
| Loader Parameters | |
| Max. Ketinggian Pembuangan | 2000 mm |
| Jangkauan Pembuangan Maks. | 1000 mm |
| Lebar Bak Loader | 1150 mm |
| Kapasitas Bak Loader | 0,2 m³ |
| Tinggi Angkat Maksimum | 3000 mm |
Sistem Penggerak & Sasis
| Mesin | |
| Model | D1105-EF02 |
| Jenis | Injeksi langsung, empat tak |
| Nilai Daya | 18.2 kW |
| Kecepatan Terukur | 3000 r/min |
| As Roda & Ban | |
| Model As Roda | 25 axle |
| Spesifikasi Ban | 26*12-12 |
| Tekanan Ban Depan | 250 kPa |
| Tekanan Ban Belakang | 250 kPa |
| Rem Kerja | Disc brake |
| Rem Parkir | Panduan |
TC06-10 Backhoe Loader Detail Highlights
Detail ember pada loader depan
- The front bucket supports fast scooping and clean dumping.
- The bucket linkage supports controlled lift and rollback during loading work.
- The bucket edge supports repeated contact with soil and aggregate.
Operator station and controls
- The operator station keeps the main controls within easy reach.
- The layout supports quick switching between loader work and backhoe work.
- The open view supports safer positioning near trench lines and stockpiles.
Rear wheel and chassis detail
- The rear chassis supports stable travel on uneven ground.
- The wheel and frame structure supports daily jobsite movement and repositioning.
- The build supports frequent start-stop work during trench cycles.
Detail boom dan ember ekskavator
- The backhoe boom supports trench digging and footing work.
- The bucket motion supports clean trench walls and steady cycle timing.
- The hose routing supports protected movement during full swing and curl.
- Pasokan langsung dari pabrik. Torchuck supports model selection, options, and production scheduling.
- ODM/OEM support. Torchuck supports color, decals, and configuration matching for your market.
- Parts and service support. Torchuck supports spare parts lists, wear parts supply, and basic service guidance.
- Packing and shipping support. Torchuck supports export packing plans based on your route and container type.
- Clear communication. Torchuck supports photos, videos, and inspection records during production.
Adegan Nyata di Lokasi Kerja
Backhoe Loader working in quarry
- The machine supports quick loading of loose material for short internal hauling.
- The machine supports cleanup work around stockpiles and access lanes.
- The machine supports steady movement on uneven quarry ground.
Backhoe Loader working on site
- The machine supports trench digging and staged backfill in one work flow.
- The loader supports material placement near the trench line.
- The backhoe supports clean trench work for utilities and drainage.
Lihat Pabrik. Beri Tahu Kami Pekerjaan Anda. Dapatkan Penawaran Hari Ini.
Silakan sampaikan negara asal, jenis permohonan, dan jumlah yang diinginkan. Jika ada persyaratan khusus, sampaikan juga jenis mesin dan tingkat emisi yang Anda inginkan. Sampaikan juga target waktu tunggu dan nama pelabuhan. Kami akan membalas dengan beberapa opsi, penawaran harga, dan rencana pengiriman.
