TCB08-12A 백호 로더
Compact 4WD machine for loading, digging, and daily jobsite support.
TCB08-12A 백호 로더
TCB08-12A Backhoe Loader Overview
그리고 TCB08-12A 백호 로더 combines a front loader and a rear backhoe on one compact body. The machine helps crews handle small loading jobs and light digging jobs in one shift.
The loader end helps the operator move soil, sand, and gravel, and the backhoe end helps the operator open trenches and clean ditches. The 4WD drive supports traction on soft ground, and the articulated steering helps the machine turn in tight areas.
The hydraulic system supports smooth motion, and the operator controls support steady, repeatable work. The machine size supports transport to farms, yards, and small sites.
백호 로더의 대표적인 용도
- The backhoe loader supports road repair and roadside work.
- The backhoe loader supports trench work for water lines and cable lines.
- The backhoe loader supports small quarry loading and stockpile cleanup.
- The backhoe loader supports farm drainage and ditch cleaning.
- The backhoe loader supports foundation prep and backfilling work.
- The backhoe loader supports yard handling for sand, soil, and gravel.
Why Choose TCB08-12A Backhoe Loader?
- The machine fits tight sites. The compact body helps the operator work near walls and fences. The steering design helps the machine turn in narrow lanes.
- The machine supports two work ends. The front loader helps the operator load and carry material. The rear backhoe helps the operator dig and shape trenches.
- The machine stays steady under load. The chassis supports stability when the bucket carries material. The axle and frame support daily travel on rough ground.
- The machine keeps work simple for the operator. The cab layout keeps controls within easy reach. The visibility helps the operator watch the bucket and the trench line.
- The machine supports low daily service effort. The service points help the crew check fluids and fasteners. The parts layout helps the crew do routine checks without extra tools.
백호 로더 사양
주요 사양
| 모델 | TCB08-12A 백호 로더 |
| 작동 무게 | 2800 kg |
| 전체 치수(L×W×H) | 5100 × 1350 × 2580 mm |
| 휠베이스 | 1910 mm |
| 휠 트레드 | 1100mm |
| 최소 지상고 | 250mm |
성능
| 시스템 압력 | 16 MPa |
| 최대 주행 속도 | 20 km/h |
| 채점 가능성 | 25° |
| 최소 회전 반경 | 3000 mm |
| 드라이브 유형 | 사륜구동(4WD) |
| 전송 유형 | 유체 동력 변속기 |
| 제동 거리 | 300mm |
작동 매개변수
| 백호(굴착기) | |
| 최대. 파기 깊이 | 1500 mm |
| 굴착 및 덤핑 높이 | 1500 mm |
| 최대. 파기 반경 | 2000 mm |
| 백호 굴착기 버킷 폭 | 350 mm |
| 백호우 버킷 용량 | 0.08 m³ |
| 최대. 파기 높이 | 2600 mm |
| Max. 파고드는 힘 | 25 kN |
| 백호우 회전 각도 | 180° |
| 로더 | |
| 최대. 덤핑 높이 | 2200mm |
| 최대 덤핑 도달 거리 | 800mm |
| 로더 버킷 폭 | 1300mm |
| 로더 버킷 용량 | 0.4 m³ |
| 최대 리프팅 높이 | 3000 mm |
| 최대 분리 힘 | 28 kN |
| 로더 사이클 시간 (총) | 12초 |
파워트레인 및 섀시
| 엔진 | |
| 모델 | Yunnei 490 |
| 유형 | Four-stroke |
| 정격 전력 | 27 kW (37 HP) |
| 정격 속도 | 2400 r/min |
| 실린더 / 보어 | 4 / 90 mm |
| 전송 시스템 | |
| 기어박스 유형 | 고정축 파워 시프트 |
| 기어 | 전진 2단 / 후진 2단 |
| 토크 컨버터 모델 | ZL28F |
| 조향 시스템 | |
| 조향 방식 | 관절식 전유압식 조향 장치 |
| 조향 각도 | 33° |
| 차축 및 타이어 | |
| 축 모델 | 130 axle |
| 타이어 사양 | 825-16 |
| 전륜 타이어 공기압 | 250 kPa |
| 후륜 타이어 공기압 | 250 kPa |
| 서비스 브레이크 | 유압식 드럼 브레이크 |
| 주차 브레이크 | 사용 설명서 |
| 용량 | |
| 연료 탱크 용량 | 20 L |
| 유압 오일 탱크 용량 | 20 L |
Backhoe Loader Detail Highlights
Backhoe boom hydraulic detail
- The backhoe boom uses strong joints that support repeated digging force.
- The hydraulic lines sit in a protected path, so the machine reduces hose hits.
- The cylinder action supports smooth bucket control during trench work.
Cab interior and controls
- The cab gives the operator a more protected working space.
- The control layout helps the operator keep hands and eyes in one area.
- The wide glass area helps the operator watch the work tool and the ground.
Chassis and front axle detail
- The chassis supports daily travel on jobsite ground and yard ground.
- The front axle supports the loader end when the bucket carries material.
- The tire setup helps the machine move between work zones without tracks.
Front loader bucket detail
- The loader bucket supports fast loading for loose soil and aggregate.
- The bucket edge supports clean cutting during leveling and backfill work.
- The bucket structure supports repeated dump cycles in daily use.
- Torchuck supports direct factory supply, so the team supports clear lead times and stable build control.
- Torchuck supports OEM and ODM options, so the buyer can set colors, labels, and common job attachments.
- Torchuck supports quality checks during assembly, so the machine keeps consistent parts fit and function.
- Torchuck supports export packing and loading plans, so the team supports safer delivery to ports and sites.
- Torchuck supports parts support and basic guidance, so the buyer can keep the machine running in the field.
실제 공사 현장 모습
Quarry working scene
- The backhoe loader moves stone and soil for short loading cycles.
- The loader end supports stockpile shaping and truck feeding.
- The steering helps the operator turn and reposition in tight quarry lanes.
Construction job site
- The backhoe loader supports trench digging and backfilling in one workflow.
- The machine supports material handling for sand, soil, and mixed fill.
- The compact size helps the crew work close to forms and site boundaries.
공장 보기. 귀하의 업무를 알려주세요. 오늘 견적 받기.
Send your country, application, and target quantity. Send your preferred engine and emission level if you have a requirement. Send your lead time target and port name. We will reply with options, pricing, and a shipping plan.
